, ,

ETL C1D1 Dual-Jacketed 200L 316L-Grade SST Filter Reactor

Across International

The ETL C1D1 Dual-Jacketed 200L Filter Reactor features a 316L stainless steel, electropolished interior, built-in lift, dual collection tanks, and precise temperature control. Ideal for demanding lab and industrial applications, this reactor is built for performance and longevity.

 

$41,524.77
$28,990.00USD

Across International – ETL C1D1 Dual-Jacketed 200L 316L-Grade SST Filter Reactor

The ETL C1D1 Dual-Jacketed 200L Stainless Steel Filter Reactor is a top-tier solution for efficient, safe filtration and reaction processes. Crafted from pharmaceutical-grade 316L stainless steel, this reactor is corrosion-resistant and equipped with an electropolished chamber for improved vacuum and sterility. Dual collection tanks with sight glass allow drainage without vacuum loss, while a dual-jacket design ensures efficient heating and cooling.

Features

  • Built-in lift for safe and easy filter removal
  • Detachable 12″ 316L stainless steel filter assembly for easy cleaning
  • Dual jacketed. Sealed outer insulation jacket provides best temperature performance inside chamber
  • All wetted parts on main vessel and lid built with pharmaceutical grade 316L SST
  • Shell and tube heat exchanger with 70 tubes for the best condensing results
  • ElectroPolished internal chamber
    • Greatly reduces surface roughness by leveling micro-peaks and valleys
    • Improved vacuum pressures, out-gassing rates, and pumping speed
    • Prolong equipment lifespan by reducing friction and wear
    • Much better sterilized and semiconductor grade surface
    • Essential for the food and pharmaceutical industries
  • Detachable condenser and collection tanks
  • Dual collection tanks with big sight glass allows you to drain without breaking vacuum
  • High drain port clearance for easy draining or added filtration
  • Large ports (top 12” bottom 12”) allows for easy chamber cleaning
  • Top placed vacuum port on condenser provides better flow and condensing results
  • No messy cable, with space saving integrated stirring motor controller
  • Heavy-duty stainless-steel frame with swivel casters
  • Built-in flashlight gives you a clear view inside the chamber
  • Flexible bellow condenser connection reduces shipping damage
  • Electric motor and controller model is ETL certified to UL and CSA standards
  • Peer reviewed model (pneumatic motor and controller) is approved to be used with Acetone, Ethanol, Heptane, Hexane, Isopropyl Alcohol, Methanol, and Pentane.

*Price is in CAD, invoice amount will be converted at the 90 day average CAD/USD exchange rate and may vary.

Author

Weight 950 lbs
Dimensions 50 × 40 × 90 in
Country of Origin

United States

Condition

Manufacturer

Electric Stirring Motor

220V, 50/60Hz, 1~Phase, 200 watts, 1/4 HP
Rotation: 450 rpm max. (±8%)
Starting torque: 3.0 N.m
Rated torque: 1.54 N.m
Built-in gearbox ratio: 3:1 to 180:1
Controller: Delta, UL listed

Pneumatic Stirring Motor

– Power: 1/4 HP
– Rotation: 450 rpm max. (±8%)
– Compressed air pressure range: 30 to 80 psi (0.2 to 0.55 MPa)
– Working temperature: -10C to +70C
– For constant use: set rpm to 80% of maximum rpm
– Motor lubricant
Mobil Grease XHP 222, Lithium Complex, Blue, NLGI Grade 2
Check/replenish/replace every 500 hours
– Air lubricant
Type: JIS K2213-1 (ISOVG32)
Recommended products: Shell Vitrea Oil 32, JOMO Turbine 32, COSMO Turbine 32
Speed: 2-3 drops per minute
– For safety purpose, detach compressed air supply when not in use, left un-attended or at night
– Do not run motor un-loaded
– Set Air Adjuster to minimum at initial run, make sure motor is working properly, before increasing CFM
– Before inspecting unit, stop the motor and detach air supply. Do NOT inspect unit when motor is in action.
– Make sure exhaust port/hole is clear from any debris or blockage
– Check every 2-3 days: Air Lubricant, Air Filter water drain

Port Configuration

Vessel lid: 12" triclamp
Center motor port: 3" triclamp
Drain port: 12" triclamp
Drain port on/off valve: 2" triclamp
Vacuum port: 1" triclamp
Condenser recirculating fluid port: 1/2" female NPT
Vessel jacket recirculating fluid port: 1" female NPT
50L/100L collection tanks
* Standard lid: 6" tri-clamp, with 1.5" tri-clamp x 4

Main Vessel

Volume: 200L
Minimum fill volume: 40L
Material: 316L grade stainless steel
Interior finish: ElectroPolished

Agitator

Structure: propeller, 3-blade, dual-layer (standard)
Style: quick-change
Material: 316L grade stainless steel
Detachable length: 28 inches

Center Fluid Jacket

Volume: 35L
Material: 304 grade stainless steel

Outer Insulation Jacket

Insulation material: perlite, 2", sealed
Housing material: 304 grade stainless steel

Collection Tank

Option 1: 10L x 2, 316L stainless steel, with manifold
Option 2: 50L x 1, 304 stainless steel, with dolly (15.5" diameter, 23.5" height, 30" with dolly)
Option 3: 100L x 1, 304 stainless steel, with dolly (15.5" diameter, 43" height, 49.5" with dolly)

Material

All wetted parts 316L grade stainless steel on main reactor body
Rest of reactor in 304 grade stainless steel, including motor coupling,
triclamps, temp/pressure gauge adapters, and chassis.

Main Condenser

Style: shell and tube heat exchanger
Number of tubes: 70
Condensing area: 0.89 m2

Pressure

Ultimate vacuum level: 1 Torr

Temperature Range

-55°C to +250°C (-67°F to +482°F)

Temperature Sensor/Display

Regular: BOOST.TTA.0101, -200C to 480C, 50.5 clamp
Explosion proof: BOOST.TTA.0102, -200C to 480C, 50.5 clamp

Sealing Gasket

Food grade Viton

Main Mounting Frame

Heavy duty 2 x 2" 304 grade stainless steel, mounted on four swivel casters

Drain Port Ground Clearance

Drain port: 19.5"
Drain valve: 12.5"

Author

SHOPPING CART

close